LR3/Disco 3
Tighten the retaining nut to 25 Nm (18 lb.ft).
Tighten the retaining bolts to 48 Nm (35 lb.ft).
21 .
Install the differential mounting bracket heat shield.
Tighten to 10 Nm (7 lb.ft).
22 .
Install the exhaust system. For additional information, refer to
Exhaust System (30.10.08)
(Section
309-00)
23 .
Install the oil level indicator.
24 .
Install the engine compartment upper heat shield.
25 .
Install the engine cover. For additional information, refer to
Engine Cover - 2.7L Diesel (12.30.50)
(Section 501-05)
26 .
Install the battery cover.
27 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
28 .
Check and top-up the engine oil.