LR3/Disco 3
Cooling Fan Belt (26.25.01)
Removal
Installation
Published : Jul 28, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Coupling unit - viscous fan -renew For additional information, refer to
Cooling Fan (26.25.19)
(Section 303-03)
3 .
Remove the cooling fan drive belt.
Using a 1/2 inch square drive bar, rotate the drive belt tensioner clockwise.
1 .
To install, reverse the removal procedure.