LR3/Disco 3
Fuel Injection Pump Belt (12.10.27)
Removal
Published : Aug 5, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the engine cover. For additional information, refer to
Engine Cover - 2.7L Diesel (12.30.50)
(Section 501-05)
3 .
WARNING: The spilling of fuel is unavoidable during this operation. Ensure that all necessary
precautions are taken to prevent fire and explosion.
Disconnect the two fuel lines.
Install blanking caps to the exposed ports.
4 .
Clamp the exhaust gas recirculation (EGR) coolant hoses to minimize coolant loss.
5 .
Disconnect the coolant hoses.
Release the clips.