LR3/Disco 3
7 .
Disconnect the height sensor link arm.
8 .
CAUTION: Use a wrench on the hexagon provided to prevent the ball joint rotating.
Remove the stabilizer bar link nut.
9 .
CAUTION: To prevent the wheel knuckle falling outwards and disconnection of the halfshaft
inner joint, support the wheel knuckle.
Loosen the upper arm retaining nut.
10 .
Using the special tool, release the upper arm ball joint.
Remove and discard the retaining nut.
11 .
Release the brake hose from the upper arm.
Raise the upper arm for access.
