LR3/Disco 3
Installation
12 .
Disconnect the starter motor electrical connections.
Remove the nut.
13 .
Remove the starter motor.
Remove the 2 bolts.
1 .
Clean the component mating faces.
2 .
Install the starter motor.
Tighten the bolts to 45 Nm (33 lb.ft).
3 .
Connect the electrical connectors.
Tighten the starter motor nut to 10 Nm (7 lb.ft).
4 .
Secure the brake hose to the upper arm.
Tighten the bolt to 23 Nm (17 lb.ft).