LR3/Disco 3
5 .
Connect the upper arm and wheel knuckle.
Install a new nut and tighten to 70 Nm (52 lb.ft).
6 .
Secure the stabilizer bar link.
Tighten the nut to 115 Nm (85 lb.ft).
7 .
Connect the height sensor link arm.
8 .
NOTE :
The heatshield consists of 3 parts.
Install the upper suspension arm and brake line heat shields.
Install the bolts.
Install the nuts.
9 .
Install the engine compartment upper RH heat shield.
Install the screws.
10 .
Install the engine undershield. For additional information, refer to
Engine Undershield (76.10.50)
(Section 501-02)
11 .
Install the front wheel.
Tighten the wheel nuts to 140 Nm (103 lb.ft).
12 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
