LR3/Disco 3
Exhaust Gas Recirculation (EGR) Modulator Valve (17.45.04)
Removal
Installation
Published : May 11, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the engine cover. For additional information, refer to
Engine Cover - 4.0L (12.30.50)
(Section 501-05)
3 .
Disconnect the EGR valve electrical connector.
4 .
Disconnect the EGR valve vacuum hose.
5 .
CAUTION: Before the disconnection or removal of any components, ensure the area around
joint faces and connections are clean. Plug any open connections to prevent contamination.
Disconnect the EGR valve feed pipe.
Loosen the EGR union nut and release the pipe.
6 .
Remove the EGR valve.
Remove the 2 bolts.
Collect and discard the gasket.
1 .