LR3/Disco 3
Install the EGR valve.
Clean the component mating faces.
Install a new gasket.
Tighten the bolts to 25 Nm (18 lb.ft).
2 .
Connect the feed pipe to the EGR valve.
Tighten the union to 25 Nm (18 lb.ft).
3 .
Connect the vacuum hose to the EGR valve.
4 .
Connect the EGR valve electrical connector.
5 .
Install the engine cover. For additional information, refer to
Engine Cover - 4.0L (12.30.50)
(Section
501-05)
6 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)