LR3/Disco 3
Positive Crankcase Ventilation (PCV) Valve (17.10.14)
Removal
Installation
Published : Apr 27, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the engine cover. For additional information, refer to
Engine Cover - 4.0L (12.30.50)
(Section 501-05)
3 .
CAUTION: Always plug any open connections to prevent contamination.
Remove the PCV valve.
Disconnect the PCV hose.
Disconnect the electrical connector.
Release the PCV valve.
Remove and discard the O-ring seal.
1 .
To install, reverse the removal procedure.
Clean the components.
Install a new O-ring seal.
Lubricate the seal with clean engine oil.
2 .
Connect the battery ground cable.
