LR3/Disco 3
Exhaust Gas Recirculation (EGR) Valve Outlet Tube (17.45.18)
Removal
Published : Jul 14, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the engine cover. For additional information, refer to
Engine Cover - 2.7L Diesel (12.30.50)
(Section 501-05)
3 .
NOTE :
Left-hand shown, right-hand similar.
Release the EGR valve outlet tube.
Release the clip.
4 .
NOTE :
Left-hand shown, right-hand similar.
Release the EGR valve outlet tube.
Disconnect the engine wiring harness.
Remove the Torx screw.
5 .
NOTE :
Left-hand shown, right-hand similar.
NOTE :
Discard the gasket.
NOTE :
Discard the retaining clip.
