LR3/Disco 3
3 .
Fully close the retaining clip.
4 .
Tighten the two LH EGR valve inlet tube retaining bolts to 10 Nm (7 lb.ft).
5 .
Tighten the three LH EGR valve retaining bolts to 10 Nm (7 lb.ft).
6 .
Install the support bracket.
Tighten the two retaining bolts to 10 Nm (7 lb.ft).
7 .
Connect the coolant inlet hose to the LH EGR valve.
8 .
Install the upper suspension arm and brake line heat shields.
9 .
Install the wheel and tire.
10 .
Install the dipstick tube retaining bolt.
Tighten to 10 Nm (7 lb.ft).
11 .
Connect the LH EGR valve electrical connector.
12 .
Connect the coolant outlet hose to the LH EGR valve.
13 .
Install the LH EGR valve outlet tube. For additional information, refer to
Exhaust Gas Recirculation
(EGR) Valve Outlet Tube (17.45.18)
(Section 303-08)
14 .
Install the battery tray. For additional information, refer to
Battery Tray (76.10.30)
(Section 414-01)
15 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
16 .
Refill and bleed the cooling system. For additional information, refer to
Cooling System Draining,
Filling and Bleeding (26.10.01)
(Section 303-03)