LR3/Disco 3
Exhaust Gas Recirculation (EGR) Valve LH (17.45.16)
Removal
Published : Aug 9, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Drain the cooling system. For additional information, refer to
Cooling System Draining, Filling and
Bleeding (26.10.01)
(Section 303-03)
3 .
Remove the battery tray. For additional information, refer to
Battery Tray (76.10.30)
(Section 414-01)
4 .
Remove the LH EGR valve outlet tube. For additional information, refer to
Exhaust Gas
Recirculation (EGR) Valve Outlet Tube (17.45.18)
(Section 303-08)
5 .
Disconnect the coolant outlet hose from the LH EGR valve.
Release the clip.
6 .
Release the LH EGR valve inlet tube.
Remove the two support bracket retaining bolts.
Remove the support bracket.
Remove and discard the retaining clip.
7 .
Remove the LH EGR valve inlet tube.
Remove the two retaining bolts.
Remove and discard the gasket.