LR3/Disco 3
Installation
13 .
Disconnect the coolant inlet hose from the LH EGR valve.
Release the clip.
14 .
Remove the LH EGR valve.
Remove the three retaining bolts.
1 .
Install the LH EGR valve.
Install the three EGR valve retaining bolts, but do not fully tighten at this stage.
2 .
NOTE :
Do not fully close the retaining clip at this stage.
Install the LH EGR valve inlet tube.
Install a new retaining clip.
Install a new gasket.
Loosely install the two EGR valve inlet tube retaining bolts.