LR3/Disco 3
The purge valve is located at the rear of the engine, on a bracket which is attached to the transmission bell housing. The
purge hose is routed from the purge valve, along the left hand side of the air intake manifold, to the elbow assembly which
locates the electric throttle.
The purge hose is connected, at the right hand rear of the engine, with a quick release coupling to the purge line which
runs parallel with the fuel feed line along the top of the fuel tank to the charcoal canister.
The purge hose continues from the purge valve and is routed to a connection on the air intake elbow assembly. The hose
is connected to the elbow with a quick release connector.
The purge valve is located on a bracket on the bell housing and is secured with a single bolt. The purge valve is a
Item Part Number
Description
1
-
Electric throttle
2
-
Purge hose
3
-
Intake manifold
4
-
Fuel feed jump hose (Ref. only)
5
-
Purge valve
6
-
Purge hose connector
7
-
Bracket
8
-
Hose clamps
9
-
Elbow assembly
