LR3/Disco 3
GENERAL
The V6 4.0 Liter engine is controlled by a Engine Control Module (ECM) manufactured by DENSO. The Engine
Management System (EMS) controls the following:
Engine fuelling
Ignition timing
Closed loop fuelling
Knock control
Idle speed control
Emission control
On Board Diagnostic
Interface with the immobilisation system
Cruise control
ENGINE CONTROL MODULE (ECM)
The ECM is located in the E-Box in the plenum area on the passenger side of the engine compartment attached to the
bulkhead.
Inputs
The ECM has the following inputs:
Central Junction Box
Engine Coolant Temperature
Brake Switch
Manifold Absolute Pressure
Accelerator Pedal Position 1
Accelerator Pedal Position 2
Throttle Position 1
Throttle Position 2
10
-
Electric park brake control module
11
-
Automatic temperature control module (ATCM)
12
-
Universal Heated Exhaust Gas Oxygen sensor (UHEGO) and Heated Exhaust Gas Oxygen sensor
(HEGO)
13
-
Ignition coils
14
-
Universal Heated Exhaust Gas Oxygen sensor (UHEGO) and Heated Exhaust Gas Oxygen sensor
(HEGO)
15
-
Generator
16
-
ECM
17
-
EGR valve/ differential pressure sensor
18
-
Clock spring
19
-
Cruise control switches
20
-
Electric throttle body