LR3/Disco 3
Specifications
Lubricants
* Apply to area around sensor threads prior to attempting to remove sensor Engine Management System
Torque Specifications
+ Apply anti-seize lubricant to threads of sensor - See Lubricants * New bolts must be fitted ** Apply clean engine oil to a
new CMP sensor O-ring seal.
Published : Aug 12, 2005
Item
Land Rover Part No.
* HO2s removal STC 50545
HO2s threads
Apply suitable high temperature anti-seize compound to threads of sensor
Item
Description
Engine management system:
Make
Siemens
Type
PAG EMS - Generation 1
Description
Nm lb-ft
Intake manifold tuning (IMT) valve bolts
10 7
+ Heated oxygen sensor (HO2S)
45 33
* RH catalytic converter to exhaust manifold bolts 22 16
* LH catalytic converter to exhaust manifold bolts 22 16
LH catalyst monitor sensor
45 33
Heat shield bolts
10 7
Mass air flow (MAF) sensor Torx screws
2
1.5
** Camshaft position (CMP) sensor bolt
6
4
Engine coolant temperature (ECT) sensor
18 13
Throttle body bolts
10 7
Crankshaft position (CKP) sensor Torx screw
8
6
Knock sensor (KS) bolt
20 15