LR3/Disco 3
14 .
Remove the exhaust cross-over pipe.
Remove the exhaust manifold heatshield retaining bolt.
Remove and discard the three retaining nuts.
Remove and discard the two gaskets.
15 .
Release the wiring harness from the LH side of the transmission.
Remove the two retaining bolts.
Release the retaining clip.
16 .
Release the wiring harness from the RH side of the transmission.
Remove the retaining bolt.
Disconnect the electrical connector.
17 .
Disconnect the transfer case electrical connectors.
Disconnect the three electrical connectors.
