LR3/Disco 3
Selector Lever (44.15.04)
Removal
Published : May 26, 2004
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
If installed, remove the transmission undershield.
Remove the 6 bolts.
3 .
Remove the transmission heat shield.
Remove the 4 bolts.
4 .
Release the selector cable.
Using an additional wrench, restrain the clamping bush and loosen the locknut.
Compress the latch and release the cable.
