Land Rover Workshop Service and Repair Manuals

Installation  

5 . 

  Release the selector cable from its guide bracket.

6 . 

  Remove the floor console upper trim panel.

7 . 

  Remove the transmission selector lever. 

Remove the 4 nuts. 

Disconnect the electrical connector. 

Release the selector cable from the body.

1 . 

  Install the transmission selector lever. 

Secure the cable to the floor. 

Connect the electrical connector. 

Tighten the nuts to 10 Nm (7 lb.ft).

2 .    

NOTE :

  Do not tighten the locking nut at this stage.