LR3/Disco 3
Installation
1 .
Install the clutch slave cylinder and release bearing assembly.
Clean the component mating faces.
Tighten the bolts to 10 Nm (7 lb.ft).
2 .
Install the fluid pipe.
Clean the component mating faces.
Install a new O-ring seal.
Install the clip.
Install the clamp.
Tighten the bolt to 10 Nm (7 lb.ft).
3 .
Install the transmission. For additional information, refer to
Transmission (37.20.02.99)
(Section 308-
03)