LR3/Disco 3
Clean the component mating faces.
Heat the adaptor shaft evenly to 120 degrees Centigrade before fitting the adaptor shaft to
the splines.
3 .
Install the Allen bolt.
Use the special tool to hold the adaptor shaft.
Apply sealant to the Allen bolt thread.
Tighten the Allen bolt to 68 Nm (50 lb.ft).
4 .
Install the transfer case. For additional information, refer to
Transfer Case - 2.7L Diesel
(41.20.25.99)
(Section 308-07)
5 .
Drain and refill the transmission. For additional information, refer to
Transmission Draining and
Filling (37.24.01)
(Section 308-03)
