LR3/Disco 3
Four-Wheel Drive (4WD) Control Module (41.30.01)
Removal
Installation
Published : May 12, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the battery. For additional information, refer to
Battery (86.15.01)
(Section 414-01)
3 .
Remove the four wheel drive control module cover.
Depress the 2 clips.
Release the cover.
4 .
Release and remove the four wheel drive control module.
Depress the 2 clips.
Disconnect the 3 electrical connectors.
1 .
To install, reverse the removal procedure.
2 .
Program a new control module using T4.