Land Rover Workshop Service and Repair Manuals

Installation  

Remove the 2 bolts. 

1 . 

  Remove the sealant from the transfer case mating faces.

2 . 

  Clean the magnetic filter.

3 . 

   CAUTION: The chamfer on the bearing inner track must face the seal. 

Using the special tool, install the output flange bearing. 

Clean the components mating faces. 

Install the circlip. 

4 . 

  Using the special tool, install a new oil seal. 

Clean the component mating faces.

Grease the new seal. 

5 . 

   CAUTION: Centralise the snap ring in the snap ring groove before installing the output flange.