LR3/Disco 3
CAUTION: Extreme care is necessary to make sure the snap ring enters the bearing squarely.
Using the special tool and with assistance, install the drive flange.
Clean the component mating faces.
Install a new snap ring.
Make sure the snap ring is fully engaged and retains the drive flange.
6 .
Secure the rear half of the transfer case with its rear face down on a flat surface.
7 .
NOTE :
Rotate the differential to engage the splines.
Install the differential module.
Clean the components.
Install the spacer.
8 .
NOTE :
Rotate the assembly to engage the clutch plates.