LR3/Disco 3
Installation
Remove the 2 bolts.
1 .
Remove the sealant from the transfer case mating faces.
2 .
Clean the magnetic filter.
3 .
CAUTION: The chamfer on the bearing inner track must face the seal.
Using the special tool, install the output flange bearing.
Clean the components mating faces.
Install the circlip.
4 .
Using the special tool, install a new oil seal.
Clean the component mating faces.
Grease the new seal.
5 .
CAUTION: Centralise the snap ring in the snap ring groove before installing the output flange.