LR3/Disco 3
11 .
Install the front half of the transfer case.
Evenly tighten the 2 Torx bolts shown to 35 Nm (26 lb.ft).
12 .
Tighten the remaining Torx bolts to 35 Nm (26 lb.ft).
13 .
Install the shift motor.
Clean the components.
Tighten the Torx bolts to 25 Nm (18 lb.ft).
14 .
With assistance, release the transfer case from the flat surface.
Remove the 2 bolts.
15 .
Install the transfer case. For additional information, refer to
Transfer Case - 4.4L (41.20.25.99)
(Section 308-07)
16 .
Refill the transfer case with the recommended fluid. For additional information, refer to
Transfer
Case Draining and Filling (41.20.04)
(Section 308-07)
17 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)