LR3/Disco 3
Installation
11 .
With assistance, remove the exhaust system.
Disconnect the 5 exhaust hangers.
12 .
NOTE :
Do not disassemble further if the component is removed for access only.
Using the special tool, remove the 4 HO2S from the catalytic converters.
1 .
CAUTION: Make sure the anti-seize compound does not contact the HO2S tip.
Using the special tool, install the HO2S to the catalytic converters and tighten to 45 Nm (33 lb.ft).
Clean the components.
Apply an anti-seize compound to the thread of the HO2S.
2 .
With assistance, install the exhaust system.
Attach the exhaust hangers.