LR3/Disco 3
Install the clips.
Tighten the bolts to 3.5 Nm (2.5 lb.ft).
2 .
CAUTION: Tighten the new tamper proof clip until the hexagon shears.
Install the fuel filler hose.
Install a new retaining clip.
3 .
Install the fuel tank front fuel level sender unit.
Secure the clip.
Secure the lead.
4 .
Install the fuel pump module.
Connect the fuel lines.
Secure with the strap.
Secure the fuel pressure regulator.
5 .
Install the fuel pump module access flange.
Clean the component mating faces.
Install a new seal.
Connect the 3 electrical connectors.
Connect the fuel supply line.
Connect the vent line.
6 .
CAUTION: Make sure the seal is installed correctly.
Secure the fuel pump module access flange.
Install the clamp.
Tighten the screw to 4 Nm (3 lb.ft).
7 .
Install the fuel supply line.