LR3/Disco 3
Fuel Fired Booster Heater (80.40.01)
Removal
Published : Apr 26, 2005
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Drain the cooling system. For additional information, refer to (Section 303-03)
3 .
Remove the front LH fender splash shield. For additional information, refer to (Section 501-02)
4 .
Release the power steering fluid reservoir.
5 .
Remove the fuel fired booster heater exhaust bracket.
Remove the bolt.
6 .
CAUTION: Before disconnecting or removing components, ensure the area around the joint
faces and connections are clean. Plug open connections to prevent contamination.
Disconnect the fuel fired booster heater fuel line.
Release the clip.
7 .
Disconnect the fuel fired booster heater inlet and outlet coolant hoses.
Release the 2 clips.
