LR3/Disco 3
Installation
8 .
Remove the fuel fired booster heater.
Disconnect the 2 electrical connectors.
Remove the 3 bolts.
Release the fuel pipe from the clip.
1 .
Install the fuel fired booster heater.
Tighten the bolts to 10 Nm (7 lb.ft).
Connect the electrical connectors.
Secure the fuel pipe in the clip.
2 .
Connect the fuel fired booster heater coolant hoses.
Secure with the clips.
3 .
Connect the fuel fired booster heater fuel hose.
Secure with the clip.
4 .
Install the fuel fired booster heater exhaust bracket.
Tighten the bolt to 10 Nm (7 lb.ft).
5 .
Install the power steering fluid reservoir.
6 .
Install the fender splash shield. For additional information, refer to (Section 501-02)
7 .
Refill and bleed the cooling system. For additional information, refer to (Section 303-03)