LR3/Disco 3
Connect the instrument panel center reinforcement electrical connectors.
21 .
Connect the CJB electrical connectors.
22 .
Connect the heater motor electrical connector.
23 .
Connect the electrical connectors to the passenger side lower A-pillar.
24 .
Connect the ground cables to the passenger side lower A-pillar.
Tighten the nuts to 10 Nm (7 lb.ft).
25 .
Connect the electrical connectors to the driver side lower A-pillar.
26 .
Connect the ground cables to the driver side lower A-pillar.
Tighten the nuts to 10 Nm (7 lb.ft).
27 .
Install the instrument panel upper section. For additional information, refer to
Instrument Panel
Upper Section (76.46.04)
(Section 501-12)
28 .
Install the front seat. For additional information, refer to
Front Seat (78.10.44/99)
(Section 501-10)
29 .
Recharge the A/C system. For additional information, refer to
Air Conditioning (A/C) System
Recovery, Evacuation and Charging (82.30.02)
(Section 412-00)
30 .
Refill the cooling system. For additional information, refer to
Cooling System Draining, Filling and
Bleeding (26.10.01)
(Section 303-03)
31 .
Install the intake manifold. For additional information, refer to (Section 303-04)