LR3/Disco 3
Installation
9 .
Remove the condenser core.
Protect the elements from damage.
Remove the bolt securing the condenser core to the radiator.
Release the 4 clips.
With assistance, remove the condenser core.
1 .
Install the condenser core.
Remove the element protection.
Align the condenser core.
Tighten the 2 bolts to 10 Nm (7 lb.ft).
With assistance, install the condenser core.
Secure the clips.
2 .
Install the radiator.
Tighten the bolts to 25 Nm (18 lb.ft).
3 .
Connect the A/C pipes.
Tighten the bolts to 25 Nm (18 lb.ft).
Remove the blanking caps from the ports.