LR3/Disco 3
odometer and trip information.
The software will check if remaining distance service is enabled (threshold reached). If the remaining distance
service is not enabled the procedure will continue from step K.
If the trip reset button is released within 10 seconds of entering the reset mode, the information display will show
'OIL'. If the trip reset button is not released after 10 seconds, the display will show the next service type and
distance/days to next service and the instrument cluster will exit the manual reset procedure.
If the trip reset button is not released after 10 seconds, the display will show the next service type and
distance/days to next service and the instrument cluster will exit the manual reset procedure.
If the oil service value reset is not required, press the trip reset button within 10 seconds of releasing it in step E
and hold for less than 5 seconds and proceed to step H. This will by-pass the oil service reset procedure.
If the oil service value is to be reset, press the trip reset button within 10 seconds of releasing it and hold for more
than 5 seconds. The information display will show 'RESET' for 5 seconds and then reset the oil service value. If
reset is not possible, the information display will show 'CANNOT RESET' for 5 seconds.
If reset is not possible, the information display will show 'CANNOT RESET' for 5 seconds.
The information display will show 'INSPECT'.
If the inspection service value reset is not required, press the trip reset button within 10 seconds of releasing it in
step G and hold for less than 5 seconds and proceed to step K. This will by-pass the inspection service reset
procedure. If the trip reset button is not pressed after 10 seconds, the display will show the next service type and
distance/days to next service and the instrument cluster will exit the manual reset procedure.
If the trip reset button is not pressed after 10 seconds, the display will show the next service type and
distance/days to next service and the instrument cluster will exit the manual reset procedure.
If the inspection service value is to be reset, press the trip reset button within 10 seconds of releasing it and hold
for more than 5 seconds. The information display will show 'RESET' for 5 seconds and then reset the inspection
service value. If reset is not possible, the information display will show 'CANNOT RESET' for 5 seconds.
If reset is not possible, the information display will show 'CANNOT RESET' for 5 seconds.
The software will check if date service is enabled (threshold reached). If the date service is not enabled the
procedure will continue from step O.
The information display will show 'DATE'.
If the date service value reset is not required, press the trip reset button within 10 seconds of releasing it in step I
and hold for less than 5 seconds and proceed to step O. This will by-pass the date service reset procedure. If the
trip reset button is not pressed after 10 seconds, the display will show the next service type and distance/days to
next service and the instrument cluster will exit the manual reset procedure.
If the trip reset button is not pressed after 10 seconds, the display will show the next service type and
distance/days to next service and the instrument cluster will exit the manual reset procedure.
If the date service value is to be reset, press the trip reset button within 10 seconds of releasing it and hold for
more than 5 seconds. The information display will show 'RESET' for 5 seconds and then reset the date service
value.
The information display will show 'END'.
If the trip reset button is pressed within 10 seconds and pressed for less than 5 seconds the procedure will return
to step E. If the trip reset button is not pressed after 10 seconds, the display will show the next service type and
distance/days to next service and the instrument cluster will exit the manual reset procedure.
If the trip reset button is not pressed after 10 seconds, the display will show the next service type and
distance/days to next service and the instrument cluster will exit the manual reset procedure.
If the trip reset button is pressed within 10 seconds and pressed and held for more than 5 seconds the information
display will show the next service type and distance/days to next service and the instrument cluster will exit the
manual reset procedure.
CUSTOMER SETTINGS
The customer settings procedure allows the driver to adjust certain vehicle settings to change the functionality of selected
vehicle functions. The customer settings feature is only available on vehicles with a high line instrument cluster.
The settings are stored in the instrument cluster EEPROM. Each vehicle has a factory set car configuration file which
defines the settings for selected vehicle functions. The factory settings are retained and the system can be changed back
to the factory default settings by either the dealer or the driver at any time.
NOTE :
The customer settings system is controlled by CAN bus message inputs and outputs from the instrument cluster, the
Central Junction Box (CJB), the ABS Module and the Integrated Head Unit (IHU). The following table details the modules
and their associated function within the settings system.
The factory default settings may differ between market configuration of the vehicle.
Module
Output Information
Central Junction Box (CJB) Remote handset identity