LR3/Disco 3
The following systems/functions support the customer settings system.
HEVAC control module
Central Junction Box
Instrument cluster
Memory control module
Navigation control module
Interior lights (CJB function)
Exterior lights (CJB function)
Central door locking (CJB function).
Customer Settings Functionality
The customer settings menu is entered by pressing and releasing the trip computer button on the left hand multifunction
switch stalk. For reasons of safety, the settings menu will only be displayed if the vehicle is stationary (vehicle speed
signal must be below 1.8 mph (3 km/h)). This is to prevent driver distraction when operating the system. At speeds above
1.8 mph (3 km/h) the settings screen is not displayed.
Once the instrument cluster has entered the settings mode, the selections can be scrolled through in turn using the ICE
radio control switches located on the steering wheel. The radio search up and down buttons |<< >>| allow for selection
through the menus. The radio volume switches +/- select the values for the current menu displayed.
When the settings menu is entered, the message center shows the 'SETTINGS' welcome message.
This display allows the driver the option of scrolling through the settings menus or exiting the settings function.
The driver can select the first settings menu by pressing the radio search button >>| or the last settings menu by pressing
the radio search button |<<. After a selection is made, the setting will be saved by either proceeding to the next menu or
exiting the customer settings menu. Pressing the trip computer button at any time will exit the customer settings system.
If a menu parameter is changed, it will be automatically saved when the next menu is selected or the customer settings
menu is exited.
TRIP DISTANCE UNITS
The 'TRIP DISTANCE UNITS' menu allows the driver to adjust the units in which the trip distance is displayed in the trip
computer display. The units can be changed using the steering wheel + or - buttons.
The menu allows the driver to select the following units:
MILES (mph) (default)
KM (Km/h)
FUEL USAGE UNITS
The 'FUEL USAGE UNITS' menu allows the driver to change the units in which the fuel consumption is displayed in the
Ignition key position
ABS Module
Vehicle moving
Instrument Cluster
Settings Status
Car configuration parameters
Driver identity
Integrated Head Unit (IHU) Scan UP button pressed
Scan DOWN button pressed
Volume + button pressed
Volume - button pressed
Distance unit request
Consumption unit request
Language request
