LR3/Disco 3
Generator (86.10.02)
Removal
Published : May 17, 2004
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00 Charging System - General Information)
3 .
Remove the accessory drive belt. For additional information, refer to
Accessory Drive Belt (86.10.03)
(Section 303-05B Accessory Drive - 4.4L)
4 .
Remove the front wheel.
5 .
Remove the splash shield. For additional information, refer to
Fender Splash Shield (76.10.48)
(Section 501-02 Front End Body Panels)
6 .
Remove the generator splash shield.
Remove the 4 clips.
7 .
Remove the battery positive cable.
Release the battery positive cable cover.
Remove the retaining nut.
Disconnect the generator electrical connectors.
8 .
Remove the generator.
Remove the 3 bolts.