LR3/Disco 3
Engine Wiring Harness - 4.0L (86.70.17)
Removal
Published : Jul 21, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the engine undershield. For additional information, refer to
Engine Undershield (76.10.50)
(Section 501-02)
3 .
Remove the intake manifold. For additional information, refer to
Intake Manifold (30.15.02)
(Section
303-01)
4 .
Remove the battery. For additional information, refer to
Battery (86.15.01)
(Section 414-01)
5 .
Remove the engine compartment fuse box main feed cable.
Remove the bolt.
6 .
Remove the engine compartment upper heat shield.
Remove the screw.
Release the 2 mounting clips.
7 .
Remove the battery compartment side wall.
Release the battery positive cable and grommet.
Release the 4 clips.