LR3/Disco 3
Fender (76.10.24)
Removal
Published : May 4, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the plenum chamber panel. For additional information, refer to
Plenum Chamber (80.15.62)
(Section 412-01)
3 .
Remove the headlamp assembly. For additional information, refer to
Headlamp Assembly (86.40.49)
(Section 417-01)
4 .
Remove the fender splash shield. For additional information, refer to
Fender Splash Shield
(76.10.48)
(Section 501-02)
5 .
Remove the fender moulding. For additional information, refer to
Fender Moulding (76.43.54)
(Section 501-08)
6 .
Remove the fender lower moulding.
Release the 4 clips.
7 .
Remove the fender air intake grille.
Release the 4 clips.
Remove the air ducting.
8 .
Remove the front fender.
Remove the 6 Torx bolts.