LR3/Disco 3
Front Seat (78.10.44/99)
Removal
Published : Oct 27, 2005
WARNING: It is imperative that before any work is undertaken on the SRS system, the appropriate
information is read thoroughly.
WARNING: Always disconnect both battery cables before beginning work on the SRS system.
Disconnect the ground cable first. Never reverse connect the battery.
1 .
Make the SRS system safe. For additional information, refer to
Standard Workshop Practices
(Section 100-00 General Information)
2 .
NOTE :
Torx bolts may be re-used.
Release the front seat.
Remove the bolt covers.
Remove and the 5 Torx bolts.
3 .
Release the safety belt lower anchor from the seat.
Remove the bolt cover.
Passenger side, disconnect the electrical connector.
Remove and discard the Torx bolt.