LR3/Disco 3
1 .
Install the front seat track motor.
Tighten the nuts to 25 Nm (18 lb.ft).
Connect the electrical connector.
Secure the electrical connector
2 .
Install the front seat base.
Tighten the nuts to 25 Nm (18 lb.ft).
3 .
Install the front seat base finisher.
Secure in the clips.
Tighten the screw.
4 .
Install the front seat cushion side finisher.
Secure in the clips.
Tighten the screws.
5 .
Install the front seat control switch.
Secure in the clips.
Tighten the screws.
6 .
Install the front seat. For additional information, refer to
Front Seat (78.10.44/99)
(Section 501-10)
