LR3/Disco 3
Front Seat Cushion (78.10.12/99)
Removal
NOTE :
Installation
Published : Aug 3, 2004
In this procedure the cushion is removed as an assembly. There is a separate procedure showing removal of the
cushion cover.
1 .
Remove the front seat cushion assembly.
Release and disconnect the 2 electrical connectors.
Remove the 4 Torx bolts.
1 .
Install the front seat cushion assembly.
Tighten the Torx bolts to 25 Nm (18 lb.ft).
Connect and secure the electrical connectors.