LR3/Disco 3
Front Seat Height Adjustment Motor (78.70.27)
Removal
NOTE :
Published : Aug 3, 2004
Front seat height adjustment motor is supplied as part of the front seat frame assembly.
1 .
Remove the front safety belt buckle. For additional information, refer to
Front Safety Belt Buckle
(76.73.30)
(Section 501-20)
2 .
Remove the front seat cushion assembly. For additional information, refer to
Front Seat Cushion
(78.10.12/99)
(Section 501-10)
3 .
Remove the front seat backrest assembly.
Release and disconnect the 2 electrical connectors.
Remove the 4 Torx bolts.
4 .
Remove the front seat electrical connector bracket.
Remove the 4 screws.
5 .
Remove the front seat tilt motor.
Release the 3 wiring harness clips.
Remove the 4 Torx bolts.