LR3/Disco 3
Front Seat Tilt Motor (78.70.29)
Removal
Published : Aug 3, 2004
1 .
Remove the front seat. For additional information, refer to
Front Seat (78.10.44/99)
(Section 501-10)
2 .
Remove the front seat cushion side finisher.
Remove the 2 Torx screws.
Release from the 3 clips.
3 .
Release the front seat control switch.
Remove the 2 screws.
Remove the 2 clips.
4 .
Remove the front seat cushion assembly. For additional information, refer to
Front Seat Cushion
(78.10.12/99)
(Section 501-10)
5 .
Remove the front seat tilt motor assembly.
Remove the 4 Torx bolts.
Disconnect the 7 electrical connectors.
