LR3/Disco 3
Rear Seat - Vehicles With: 40/20/40 Split Seat (78.10.70/78.10.71)
Removal
Installation
Published : Oct 27, 2005
1 .
NOTE :
The Torx bolts can be re-used.
Release the rear seat.
Remove the front 2 Torx bolts.
Fold the seat assembly forwards.
Disconnect the electrical connector.
Remove the rear 2 Torx bolts.
2 .
Remove the rear seat assembly.
1 .
Install the rear seat assembly.
2 .
Secure the rear seat.
Connect the electrical connector.
Tighten the rear Torx bolts to 45 Nm (33 lb.ft).
Fold seat assembly rearwards.
Tighten the front Torx bolts to 45 Nm (33 lb.ft).
