LR3/Disco 3
Rear Seat - Vehicles With: 60/40 Split Seat (78.10.70/78.10.71)
Removal
NOTE :
Installation
Published : Oct 27, 2005
This procedure shows the removal and installation of both the LH and the RH seats.
1 .
NOTE :
The Torx bolts can be re-used.
Release the RH rear seat.
Fold the LH seat cushion forward.
Remove the 4 Torx bolts.
Fold down the rear seat backrest.
2 .
Remove the RH rear seat.
3 .
NOTE :
The Torx bolts can be re-used.
Release the LH rear seat.
Fold the LH seat cushion forward.
Remove the 6 Torx bolts.
Fold down the rear seat backrest.
4 .
With assistance, remove the LH rear seat assembly.
