LR3/Disco 3
Front Door Window Regulator and Motor (86.25.03)
Removal
Published : May 13, 2004
1 .
Remove the front door trim panel. For additional information, refer to
Front Door Trim Panel
(76.34.01)
(Section 501-05)
2 .
Remove the front door window glass. For additional information, refer to
Front Door Window Glass
(76.31.01)
(Section 501-11)
3 .
Remove the speaker.
Disconnect the electrical connector.
Remove the 4 screws.
4 .
Remove the glass guide channel.
Release the channel lining.
Remove the bolt.
5 .
NOTE :
Rotate the assembly within the aperture through 90 degrees and release the upper edge from the
rear side of the aperture first.
Remove the window motor and regulator assembly.
Disconnect the electrical connector.