LR3/Disco 3
Installation
Remove the 4 bolts.
Remove the 2 nuts.
1 .
Install the window motor and regulator assembly.
Tighten the bolts and nuts to 10 Nm (7 lb.ft).
Connect the electrical connector.
2 .
Install the glass guide channel.
Tighten the bolt to 10 Nm (7 lb.ft).
Install the channel lining.
3 .
Install the speaker
Align the door wiring harness clip.
Tighten the screws.
Connect the electrical connector.
4 .
Install the front door window glass. For additional information, refer to
Front Door Window Glass
(76.31.01)
(Section 501-11)
5 .
Install the front door trim panel. For additional information, refer to
Front Door Trim Panel (76.34.01)
(Section 501-05)