LR3/Disco 3
Vehicles with navigation system
All vehicles
1 .
Install the navigation system display module.
Connect the electrical connectors.
Connect the fibre optic connector.
Tighten the Torx screws.
1 .
Install the passenger side closing trim panel.
Connect the electrical connector.
Secure the clip.
Tighten the screws.
2 .
Install the driver side closing trim panel.
Connect the electrical connector.
Secure the clip.
Tighten the screws.
3 .
Install the cigar lighter assembly.
Tighten the screws.
Connect the electrical connectors.
Secure with the clips.
4 .
Install the instrument panel switch assembly.
Connect the electrical connector.
Tighten the Torx screws.
5 .
Install the climate control assembly.
Connect the electrical connectors.
6 .
Install the audio unit. For additional information, refer to
Audio Unit (86.50.81)
(Section 415-01)
7 .
Install the floor console. For additional information, refer to
Floor Console (76.25.01)
(Section 501-
12)