LR3/Disco 3
Instrument Panel Console Switch Assembly (86.65.17)
Removal
Installation
Published : Jun 14, 2004
1 .
Remove the instrument panel console. For additional information, refer to
Instrument Panel Console
(76.25.03)
(Section 501-12)
2 .
Remove the instrument panel switch assembly.
Remove the 2 Torx screws.
Disconnect the electrical connector.
1 .
Install the instrument panel switch assembly.
Connect the electrical connector.
Tighten the Torx screws.
2 .
Install the instrument panel console. For additional information, refer to
Instrument Panel Console
(76.25.03)
(Section 501-12)
