Land Rover Workshop Service and Repair Manuals

Installation  

15 . 

  Release the on-board diagnostic connector.

Remove the 2 Torx screws. 

16 . 

  Remove the instrument panel driver side reinforcement.

Remove the 11 Torx screws. 

1 . 

  Install the instrument panel driver side reinforcement.

Tighten the Torx screws. 

2 . 

  Attach the on-board diagnostic connector.

Tighten the Torx screws. 

3 . 

  Attach the air temperature sensor.

Secure the clips. 

4 . 

  Install the instrument cluster.