LR3/Disco 3
Connect the electrical connector.
Tighten the Torx screws.
5 .
Install the steering column gaiter panel.
Secure with the clips.
Tighten the Torx screws.
6 .
Install the steering column switch assembly.
Tighten the Torx bolts to 3 Nm (2 lb.ft).
7 .
Connect the clockspring and multifunction switch electrical connectors.
8 .
Install the steering column side trim panels.
Secure with the clips.
9 .
Install the steering column shrouds.
10 .
Install the instrument panel access panel.
Secure with the clips.
11 .
Install the driver side register trim panel. For additional information, refer to
Driver Side Register
Trim Panel (76.46.12)
(Section 412-01)
12 .
Install the instrument panel center reinforcement. For additional information, refer to
Instrument
Panel Center Reinforcement (76.46.34)
(Section 501-12)
13 .
Install the steering wheel. For additional information, refer to
Steering Wheel (57.61.01)
(Section
211-04)